Table of Contents
Advertisement
Chassis operations
The 9048XS-2 or 9012QQ-2 go through a series of steps as part of the upgrade process,
including burning of images into the FPGAs on the module and can go through multiple
module resets to activate those firmware images. Up to 35 minutes may be required for the
upgrades on each module to be complete. Allow the upgrade process to complete
successfully. Failure to do so could result in a failed or an incorrect upgrade or incorrect
commissioning of your device. Refer to Release Notes for Avaya Virtual Services Platform
9000, NN46250-401 for more information.
6. Insert each I/O module, one at a time, and wait for the system to detect and update the I/O
module before you insert the next I/O module. You can insert the I/O modules in whichever
order you want.
Allow up to 35 minutes for second generation I/O modules to upgrade.
7. After you have installed all of the I/O modules you intend to install, ensure the status LED is
green and stays green on each I/O module, and that all ports light up.
Example
The following is a sample of the log messages you see on the console of the CP module, after you
insert the CP module and SF module, and turn on the chassis.
********************************************************************************
CP1
[12/10/14 14:00:15.409] 0x00270422 00000000 GlobalRouter SW INFO cold boot
(0x00000001)
CP1
[12/10/14 14:00:15.409] 0x00270422 00000000 GlobalRouter SW INFO intflash file
system cumulative: ret=1747 mod=1091
CP1
[12/10/14 14:00:20.421] 0x00010787 00000000 GlobalRouter HW INFO Got mastership,
master
CP1
[12/10/14 14:00:22.909] 0x00034594 00000000 GlobalRouter SW INFO System boot
CP1
[12/10/14 14:00:22.909] 0x00034595 00000000 GlobalRouter SW INFO VSP-9000 System
Software Release 3.4.5.0_B002
CP1
[12/10/14 14:00:24.991] 0x00010704 00000000 GlobalRouter HW INFO Waiting for CAN
initialization
CP1
[12/10/14 14:00:24.992] 0x00010774 00000000 GlobalRouter HW INFO Detected 9012
chassis
CP1
[12/10/14 14:00:25.022] 0x0001081c 00400010.1 DYNAMIC SET GlobalRouter HW INFO Slot
1 is initializing.
CP1
[12/10/14 14:00:25.022] 0x0001081c 00400010.21 DYNAMIC SET GlobalRouter HW INFO Slot
SF 1 is initializing.
CP1
[12/10/14 14:00:26.058] 0x000bc5cd 00000000 GlobalRouter RIP INFO Created instance
of RIP
CP1
[12/10/14 14:00:26.060] 0x0019c58e 007b0001 DYNAMIC CLEAR GlobalRouter VRF INFO VRF
is up
CP1
[12/10/14 14:00:26.062] 0x0019c58e 007b0001 DYNAMIC CLEAR MgmtRouter VRF INFO VRF is
up
CP1
[12/10/14 14:00:26.142] 0x00300604 00000000 GlobalRouter SLAMON INFO Starting Slamon
Monitor Agent Controller
CP1
[12/10/14 14:00:26.143] 0x0027042b 00000000 GlobalRouter SW INFO Process slamon.sh
started, pid:2739
CP1
[12/10/14 14:00:26.291] 0x000345b3 00000000 GlobalRouter SW INFO Waiting for fabric
and control plane initialization
CP1
[12/10/14 14:00:26.296] 0x00248519 00000000 GlobalRouter SF-APP INFO SF Manager
Initialized!
CP1
[12/10/14 14:00:27.482] 0x00010729 00000000 GlobalRouter HW INFO Detected 9006AC
Power Supply in slot PS 1. Adding 1200 watts to available power
CP1
[12/10/14 14:00:27.482] 0x00010728 0040000a.3 DYNAMIC SET GlobalRouter HW WARNING
Power Supply PS 3 is either faulty or AC power is not being supplied to back of chassis
for this supply
CP1
[12/10/14 14:00:27.483] 0x00010729 00000000 GlobalRouter HW INFO Detected 9006AC
October 2015
Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
88
Advertisement
Table of Contents
