Avaya Virtual Services Platform 9000 Installation Manual page 18

Virtual Services Platform 9010 chassis
The zone alarm is triggered after one of the following events occurs:
• A module alarm is triggered.
• Module alarms are cleared.
Heat sensor locations for first generation and second generation I/O modules
The following figure shows the baseboard component of a first generation I/O module on the left and
the PIM component of a first generation I/O module on the right.
Figure 4: Heat sensor locations in a first generation I/O module
The following figure shows the baseboard component of a second generation I/O module on the left
and the PIM component of a second generation I/O module on the right.
October 2015 Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
18