Avaya Virtual Services Platform 9000 Installation Manual page 59

Figure 15: Heat sensor locations in a second generation I/O module
Use the following table to understand the heat sensors in the preceding I/O modules for first
generation and second generation modules.
Table 11: Zone to heat sensor mapping for first generation .and second generation I/O modules
Zones
zone 1
zone 2
zone 3
zone 4
zone 5
The system monitors the temperature every 30 seconds and displays the temperature on all the
modules with the following command: show sys-info temperature
Note:
The I/O module alarm threshold and shutdown threshold temperatures differ for the Virtual
Services Platform 9010 and the Virtual Services Platform 9012.
The following example shows command output for both first and second generation I/O modules.
Switch:1#show sys-info temperature
Temperature Info :
October 2015
Virtual Services Platform 9012 chassis fundamentals
Heat sensors
address 90
address 92
address 98
address 94
address 96
Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
59