Avaya Virtual Services Platform 9000 Installation Manual page 38

Virtual Services Platform 9010 chassis
Procedure
1. Align the holes in the upper cable management bracket to the holes on the top of the chassis
front.
2. Use the screws to attach the bracket to the chassis.
3. Align the holes in the lower cable management bracket to the holes on the top of the chassis
front.
4. Use the screws to attach the bracket to the chassis.
5. Align the tabs of each side of the cable management cover with the slots on the brackets.
6. Lower the cover into place.
October 2015 Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
38