Table of Contents
Advertisement
Virtual Services Platform 9012 chassis
Assembling and installing cable management brackets
Use this procedure to install the I/O and power cable brackets. Use these brackets to keep cable
clusters fastened and out of the way but still accessible for maintenance.
About this task
Important:
Do not attach any cables until after the bracket installation.
Procedure
1. Attach the three Z brackets to the vertical cable bracket as shown below using 6 of the
screws provided. Nuts are not required since the Z brackets are already threaded on one
side for connection to the I/O cable bracket using screws alone.
October 2015
Installing the Avaya VSP 9000
Comments on this document? infodev@avaya.com
80
Advertisement
Table of Contents
