Avaya Virtual Services Platform 9000 Installation Manual page 71

Virtual Services Platform 9012 chassis fundamentals
Figure 20: Accessories of the chassis shipping container
Other equipment
You require items not included in the Virtual Services Platform 9012 chassis accessory package.
The following sections describe these items. Before you install the Virtual Services Platform 9012
hardware, ensure that you obtain all the cables, tools, and other equipment you need.
To configure startup options and to monitor the results of startup diagnostics, you can attach a PC,
laptop, VT100 console or equivalent, such as a PC terminal emulator.
The hardware required to mount the Avaya Virtual Services Platform 9012 chassis in an equipment
rack depends on your equipment rack type.
You need a Phillips screwdriver to install the Virtual Services Platform 9012 chassis in a standard
rail-type equipment rack if using Avaya-supplied screws.
Install the device in standard EIA-310D 19-inch racks and ETSI 600-millimeter (mm) racks. The
chassis fits a standard 19-inch rack using the mounting brackets that ship with the unit. To install the
chassis in an ETSI 600-mm rack, you must provide mounting brackets to adapt the chassis to the
rack.
If the rack does not use threaded rail holes, you must use the supplied clip nuts with the clip nut
screws.
Avaya does not include the cables required for your network configuration in the Virtual Services
Platform 9012 chassis accessory package.
October 2015 Installing the Avaya VSP 9000 71
Comments on this document? infodev@avaya.com