Matching Connectors And Cables - Sony ICP-X7000 Installation Manual

1-12. Matching Connectors and Cables

Use the following connectors, cables or equivalents when connecting cables to the unit.
Model name Panel indication
MKS-X2700 REMOTE 1 to 6
SERIAL TALLY1, 2
TALLY/GPI OUT 1-18
TALLY/GPI OUT 19-36
TALLY/GPI IN 1-34
S-BUS
REF IN
MVS
UTIL
MKS-X7700 REMOTE1 to 4
SERIAL TALLY1, 2
TALLY/GPI IN 1-34
TALLY/GPI IN 35-68
S-BUS
REF IN
MVS
UTIL
MKS-X7701 TALLY/GPI OUT 1-18
TALLY/GPI OUT 19-36
TALLY/GPI OUT 37-54
MKS-X7702 REMOTE1 to 6
*3
MKS-X7011 LAN
*4
DEVICE
*3
ICP-X7000 LAN
MKS-X7075
*1: Conforms to IEEE 802.3 Ethernet 1000BASE-TX standard.
*2: Shield type is recommended.
*3: Compliance with PoE + (IEEE802.3at)
*4: Compliance with USB2.0
1-30 (E)
Connector name
D-sub 9pin, Female
D-sub 37pin, Female
BNC, 75 Z
*1
RJ-45 modular jack
D-sub 9pin, Female
D-sub 37pin, Female
BNC, 75 Z
*1
RJ-45 modular jack
D-sub 37pin, Female
D-sub 9pin, Female
*1
RJ-45 modular jack
USB Type A receptacle
*1
RJ-45 modular jack
Matching connector and cable
Name
D-sub 9-pin, Male
Connector 9-pin, Male
Junction Shell 9-pin
D-sub 37-pin, Male
Connector 37-pin, Male
Junction Shell 37-pin
Belden 1694 coaxial cable
*2
CAT5e or equivalent
D-sub 9-pin, Male
Connector 9-pin, Male
Junction Shell 9-pin
D-sub 37-pin, Male
Connector 37-pin, Male
Junction Shell 37-pin
Belden 1694 coaxial cable
*2
CAT5e or equivalent
D-sub 37-pin, Male
Connector 37-pin, Male
Junction Shell 37-pin
D-sub 9-pin, Male
Connector 9-pin, Male
Junction Shell 9-pin
*2
CAT5e or equivalent
*2
CAT5e or equivalent
ICP-X7000