Sony ICP-X7000 Installation Manual page 84

2. Set the IP address of SCS that copies and stores data at an emergency when making PWS-100SC1/
PWS-110SC1 (SCS) redundant.
(1) Select "Enable" or "Disable" for [Redundant SCS].
. Enable: Enables SCS to be redundant.
. Disable: Disables SCS to be redundant. (Initial value)
(2) Enter a value (0 to 255) divided into four by periods as the IP address of PWS-100SC1/PWS-110SC1
(SCS) to be a data copy destination.
t
This setting is not required when "Disable" is selected.
3. Set the IP address of the Util LAN of SIU1/SIU2 connected to PWS-100SC1/PWS-110SC1 (SCS).
(1) Enter a value (0 to 255) divided into four by periods in [IPv4 Address] of [SIU1 Util LAN] or [SIU2
Util LAN] as the IP address of respective IPv4.
(2) Enter a value (8 to 30) in [Prefix Length] as the prefix length of respective IPv4.
4. Click [Apply].
The settings are stored.
1-76 (E)
ICP-X7000