Sony ICP-X7000 Installation Manual page 71

Systems to be connected to XVS-8000/XVS-7000/XVS-6000
Procedure
1. Turn on the PWS-100SC1/PWS-110SC1.
2. Connect a PC or a tablet terminal to the same network as the PWS-100SC1/PWS-110SC1. (Refer to
Section 1-15.)
3. Run the web browser of the PC or tablet and access the following URL.
For using encrypted communication:
For using unencrypted communication: http://192.168.111.1/
The Root menu page showing links to each menu opens.
4. Click or tap the link of the following menu on the [Links for applications] window to access it.
. Menu Setup
This menu is used for the Web Application of the XVS series.
This menu manages creation of account used in the Web Application, various settings, and software
license.
Entering the following URL enables direct access.
_ For using encrypted communication:
_ For using unencrypted communication: http://192.168.111.1/xwm/menu-setup
. Maintenance Menu
This menu is operated from the web browser of the PC.
This menu allows you to make following settings.
_ PWS-100SC1/PWS-110SC1 settings and the panel configuration (detailed in Section 1-17-1).
_ PWS-100SC1/ PWS-110SC1 network settings (detailed in Section 1-17-2).
_ The network settings for connected devices (detailed in Section 1-17-3)
_ The external protocol setting (detailed in Section 1-17-4)
Entering the following URL enables direct access.
_ For using encrypted communication:
_ For using unencrypted communication: http://192.168.111.1/xwc/
n
If a URL beginning with https://192.168.111.1 (shown above) is accessed, a warning message "Your
connection is not private", for example, is output, and some functions do not work normally.
To make a connection to a URL (https:), perform the following procedure to install the root certificate
corresponding to the server (Sony-IPLiveProduction-<serial number>) in the web browser. Also name
resolution setting is required.
ICP-X7000
https://192.168.111.1/
https://192.168.111.1/xwm/menu-setup
https://192.168.111.1/xwc/
1-63 (E)