Icp-X7000/Mks-X7075 - Sony ICP-X7000 Installation Manual

LE-402 board
LE-402 board (Side B)
<LED>
D1: POWER
Power supply unit status indication.
This LED is lit green while +12 V is normally output and
the fans in the power supply unit are normally rotating.
This LED lights red when +12 V becomes abnormal or any
fan in the power supply unit malfunctions.
D2: BEACON
Not used.
1-44 (E)

1-14-2. ICP-X7000/MKS-X7075

PIF-53 board
D
E
<LED>
D800 (C-3): FPGA Config
This LED lights when configuration of the FPGA is com-
pleted, and it flashes when CPU is boot.
D1200 (C-3): LINL
This LED lights when the Ethernet links.
D1201 (C-3): ACT
This LED is flashed while the Ethernet is in communica-
tion.
<Switch>
S400 (B-3): MODE setting
Function
S400-1 (Bit1) Boot Device
ON: SD Card
OFF: NOR Flash
S400-2 (Bit2) Reserved
S400-3 (Bit3) Reserved
S400-4 (Bit4) Reserved
S400-5 (Bit5) Boot Mode
ON: NBL
OFF: CE-Linux
S400-6 (Bit6) Boot Mode for CE-Linux OFF
ON: Recovery
OFF: Normal
S400-7 (Bit7) Reserved
S400-8 (Bit8) Reserved
S403 (B-3): Reset
This switch is used to reset PIF-53/MPU-163 board hard-
ware.
C B
A
1
2
S403
3
S400
PIF-53 board (Side B)
Factory default setting
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ICP-X7000