Matching Connectors And Cables - Sony MKS-9011A Installation Manual

1-7. Matching Connectors and Cables

Use the following connectors, cables or equivalents when connecting cables to the unit.
Model name Panel indication
MKS-9011A/9012A EXT PANEL
MENU PANEL
GPI
EXT DISPLAY
EDITOR PANEL
REMOTE
LTC IN
REF IN
CTRL
PERIPH
DATA
DEVICE
MKS-8011A SCU
MKS-8075A SCU IN
SCU OUT
*1 : SWC-5002 (2 m)
SWC-5005 (5 m)
SWC-5010 (10 m)
*2 : The following crimp contact is required for the plug.
AWG#18 to #22: 1-566-493-11
AWG#22 to #24: 1-564-774-11
AWG#24 to #28: 1-564-775-11
*3 : Conforms to IEEE 802.3 Ethernet 100BASE-TX standard.
CCP-9000A
Connector name Matching connector and cable
Name
D-sub 50-pin, Female Use the dedicated cable
specified by Sony Corp.
D-sub 25-pin, Female D-sub 25-pin, Male
Connector 25-pin, Male
Junction Shell 25-pin
D-sub Miniature 15-pin, Use the display cable that
Female is commercially available
on market.
Use the dedicated cable,
supplied with the Editing
Keyboard.
BNC, 75 Z BNC, 75 Z
Belden 8281
coaxial cable
BNC, 75 Z BNC, 75 Z
Belden 8281
coaxial cable
(SDTV system)
or
Belden 1694A
coaxial cable
(HDTV system)
*3
RJ-45 modular jack _
USB Type A Use the cable supplied or the
receptacle USB cable that is commercially
available on market. (with plug)
(5 m or less)
D-sub 50-pin, Male Use the dedicated cable
specified by Sony Corp.
D-sub 50-pin, Male Use the dedicated cable,
supplied with the MKS-8075A
D-sub 50-pin, Female
or dedicated cable
by Sony Corp.
Sony part No.
*1
*2
1-566-356-11
1-563-377-11
*1
*1 specified
1-19