Sony ICP-X7000 Installation Manual page 72

If it is hard to make settings with the following procedure, connection by means of "http" is also possible.
However, communication data is not encrypted with the "http" connection. If you use this connection,
accept security risks.
Installing root certificate
1. Access http://192.168.111.1.
2. Click or tap [Download certificate files].
The certificate file is downloaded to the PC or tablet.
3. Install the root certificate according to the manual of the PC or tablet.
Setting name resolution
1. Access https://192.168.111.1.
2. Refer to the server certificate issue destination according to the browser operation method.
t
For Android 5 and Chrome 48, perform the following procedure to refer to the server certificate issue
destination.
(1) Tap the key icon on the left of the address bar.
(2) Tap [Details] on the pop-up window.
(3) Tap [View certificate] on the pop-up window.
The certificate viewer appears.
(4) Refer to the following shown in "Common name (CN)" in [Issued to].
Sony-IPLiveProduction-<serial number>
3. Set the name resolution between IP address (192.168.111.1) of PWS-100SC1/PWS-110SC1 and the
server certificate issue destination "Sony-IPLiveProduction-<serial number>" (referred to in step 2)
by registering the name resolution in the hosts file.
4. When accessing the URL of each menu after the name resolution has been set, access "https://Sony-
IPLiveProduction-<serial number>" instead of "https://192.168.111.1".
n
When using Chrome 58 and later, a security warning message appears when PC UI is displayed.
Ignore this warning and proceed with operation.
1-64 (E)
ICP-X7000