MKS-X2700
7. Loosen the two screws (with stopper) to detach the
front panel.
MKS-X2700
Screw
(with stopper)
Front panel
MKS-X7700
7. Perform the following procedure to detach the front
panel.
(1) Loosen the four screws (with stopper) and draw the
front panel.
(2) Open the clamper.
(3) Disconnect the harness from the connector on the
CA-90 board, and then detach the front panel.
MKS-X7700
Harness
Screws
(with stopper)
Front panel
ICP-X7000
Screw
(with stopper)
Clamper
Connector
CA-90 board
Screws
(with stopper)
8. Fix the rack angle in the rack using the specified
screws.
MKS-X2700
B5
12
MKS-X7700
B5
12
9. Attach the front panel to the equipment.
B5
12
B5
12
1-29 (E)