Connectors And Cables; Settings Of Onboard Switch - Sony ICP-X7000 Installation Manual

2-4-5. Connectors and Cables

Use the following connectors (or cables) or equivalents for cable connection.
Panel Indication Applicable Connector (Cable)
HDMI HDMI type A
Use the cable that meets any of the following
specifications.
High Speed HDMI Cable, Premium High Speed
HDMI Cable
USB Use a cable for super speed USB.
LAN1/2 Network cable
STP
*STP: Shielded Twisted Pair

2-4-6. Settings of Onboard Switch

n
Except for S800-8, do not change the default settings of switches on the MB-1204 board when installing
the unit.
Board Ref No. Bit
MB-1204 S800
1-7
8
S2201 1-4
2-24 (E)
*
cable is recommended
Function
Name
_
Factory use
ON: When AC power is supplied to the rear
unit, the PWS-110SC1 starts.
OFF: When the On/Standby button on the
front panel is pressed, the PWS-
110SC1 starts.
CFG Factory use
Sony Part No. Remarks
_ _
_ _
_
Commercially
available
Factory Setting
(■: Knob position)
ICP-X7000