Sony ICP-X7000 Installation Manual page 107

1. Parts Required
Specified Rack Mount Kit
RMM-10 (Optional accessory)
n
When you use any other rack mount kit than the specified
one, you may fail to mount the unit to the specified 19 inch
rack.
Parts packed in RMM-10
. Rack bracket ............................................................. 2 pcs
. Rack mount adaptor right ........................................... 1 pc
[Including screw (B4 x 6: 7-682-560-09) 2 pcs]
. Rack mount adaptor left ............................................ 1 pc
[Including screw (B4 x 6: 7-682-560-09) 2 pcs]
. Rack bracket attachment screw
(B4 x 6: 7-682-560-09) ............................................ 6 pcs
. Adaptor attachment screw
(B4 x 10: 7-682-560-10) .......................................... 6 pcs
Screws for Rack Mount
. Screw for rack mount (B5 x 12: 7-682-576-04) ...... 4 pcs
t
These parts are supplied with this unit.
Parts for square holes
The following part is necessary to mount the unit to the
square-hole rack.
Rack mount parts assembly (A-2126-310-A)
Components of rack mount parts assembly
. Positioning plate. ...................................................... 4 pcs
. Plate nut (M5) ........................................................... 2 pcs
Positioning plate
ICP-X7000
Plate nut (M5)
2. Removing the Front Panel
Loosen the two anti-drop screws, and remove the front
panel.
Anti-drop screw
Front panel
3. Mounting to Rack (M5 Screw Holes)
Refer to the RMM-10 Installation Manual.
n
When fixing the rack angles of the unit to the rack, use the
screws (B5 x 12) supplied with the unit.
B5 12
Anti-drop screw
B5 12
2-11 (E)