AMX NXA-ENET24 Instruction Manual page 92

Configuring the Switch
CLI – This example sets the 802.1x parameters on port 2. For a description of the additional fields
displayed in this example, see show dot1x section on page 259.
Console(config)#interface ethernet 1/2300
Console(config-if)#dot1x port-control auto256
Console(config-if)#dot1x re-authentication257
Console(config-if)#dot1x max-req 5255
Console(config-if)#dot1x timeout quiet-period 40258
Console(config-if)#dot1x timeout re-authperiod 5258
Console(config-if)#dot1x timeout tx-period 40259
Console(config-if)#exit
Console(config)#exit
Console#show dot1x259
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name
Authorized
1/1
yes
1/2
.
.
.
1/25
n/a
1/26
n/a
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
reauth-enabled: Disable
reauth-period:
quiet-period:
tx-period:
supplicant-timeout:
server-timeout: 50
reauth-max:
max-req:
Status
Operation mode
Max count
Port-control
Supplicant
Current Identifier
Authenticator State Machine
State
Reauth Count
Backend State Machine
State
Request Count
Identifier(Server)
Reauthentication State Machine
State
.
.
802.1X is disabled on port 1/26
Console#
Displaying 802.1x Statistics
This switch can display statistics for dot1x protocol exchanges for any port.
76
Status Operation Mode
disabled Single-Host
enabled Single-Host
disabled Single-Host
disabled Single-Host
3600
60
30
30
2
2
Unauthorized
Single-Host
5
Auto
00-00-00-00-00-00
0
Initialize
0
Initialize
0
0
Initialize
Mode
ForceAuthorized
Auto n/a
ForceAuthorized
ForceAuthorized
NXA-ENET Software Management Guide