AMX NXA-ENET24 Instruction Manual page 74

Configuring the Switch
CLI – Use the snmp-server group command to configure a new group, specifying the security
model and level, and restricting MIB access to defined read and write views.
Console(config)#snmp-server group v3secure v3 priv read
defaultview write defaultview296
Console(config)#exit
Console#show snmp group297
Group Name: v3secure
Security Model: v3
Read View: defaultview
Write View: defaultview
Notify View: none
Storage Type: nonvolatile
Row Status: active
Console#
Setting SNMPv3 Views
SNMPv3 views are used to restrict user access to specified portions of the MIB tree. The predefined
view "defaultview" includes access to the entire MIB tree.
Command Attributes
58
View Name – The name of the SNMP view. (Range: 1-64 characters)
View OID Subtrees – Shows the currently configured object identifiers of branches
within the MIB tree that define the SNMP view.
Edit OID Subtrees – Allows you to configure the object identifiers of branches within
the MIB tree. Wildcards can be used to mask a specific portion of the OID string.
Type – Indicates if the object identifier of a branch within the MIB tree is included or
excluded from the SNMP view.
NXA-ENET Software Management Guide