Show Garp Timer - AMX NXA-ENET24 Instruction Manual

Command Line Interface
Example
Console(config)#interface ethernet 1/1
Console(config-if)#garp timer join 100
Console(config-if)#
Related Commands

show garp timer

Use this command to show the GARP timers for the selected interface.
Syntax
Default Setting
Command Mode
Example
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 20 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Related Commands
354
show garp timer (354)
show garp timer [interface]
interface
ethernet unit/port
unit - This is device 1.
port - Port number.
port-channel channel-id (Range: 1-6)
Shows all GARP timers.
Normal Exec, Privileged Exec
garp timer (353)
NXA-ENET Software Management Guide