Show Map Ip Precedence - AMX NXA-ENET24 Instruction Manual

Command Line Interface
Default Setting
Command Mode
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Console#show map ip port
TCP port mapping status: disabled
Port
--------- -------- ---
Eth 1/ 5
Console#
Related Commands

show map ip precedence

Use this command to show the IP precedence priority map.
Syntax
Default Setting
Command Mode
364
None
Privileged Exec
Port no. COS
80 0
map ip port (Global Configuration) (360)
map ip port (Interface Configuration) (360)
show map ip precedence [interface]
interface
ethernet unit/port
unit - This is device 1.
port - Port number.
port-channel channel-id (Range: 1-6)
None
Privileged Exec
NXA-ENET Software Management Guide