AMX NXA-ENET24 Instruction Manual page 44

Configuring the Switch
CLI – Specify the hostname, location and contact information.
FIG. 4 General Switch Information
Console(config)#hostname Intelligent Fast Ethernet PoE
Switch195
Console(config)#snmp-server location TPS 1st Floor290
Console(config)#snmp-server contact Geoff290
Console(config)#end
Console#show system
System description: Intelligent Fast Ethernet PoE Switch; SW
version: V2.3.2.5
System OID string: 1.3.6.1.4.1.259.6.10.56
System information
System Up time:
7.90 seconds
System Name:
System Location:
System Contact:
MAC address:
Web server:
Web server port:
Web secure server:
Web secure server port:
Telnet server
Telnet server port
Authentication login:
Authentication enabled:
POST result
Uart Loopback Test ........... PASS
Uart 2 Loopback Test ......... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device Test .............. PASS
Switch Int Loopback test ..... PASS
Done All Pass.
Console#
28
0 days, 2 hours, 25 minutes, and
Intelligent Fast Ethernet PoE Switch
TPS 1st Floor
Geoff
00-30-F1-B3-16-C0
enabled
80
enabled
443
: enable
: 23
local
local
NXA-ENET Software Management Guide