AMX NXA-ENET24 Instruction Manual page 51

Configuring the Switch
Web – Click System, File, Copy. Select "tftp to file" from the drop-down menu. Select "opcode" as
the file type, then enter the IP address of the TFTP server and the source and destination file names.
Click Apply.
FIG. 8 Operation Code Image File Transfer
If you download to a new destination file, select the file from the drop-down box for the operation
code used at startup, and click Apply. To start the new firmware, reboot the system via the System/
Reset menu.
FIG. 9 Select Start-Up Operation File
To delete a file, select System, File, Delete. Select the file name from the given list by checking the
tick box and then click Apply. Note that the file currently designated as the startup code cannot be
deleted.
FIG. 10 Deleting Files
NXA-ENET Software Management Guide 35