AMX NXA-ENET24 Instruction Manual page 73

Command Attributes
Web – Click SNMP, SNMPv3, Groups. Click New to configure a new group. In the New Group
page, define a name, assign a security model and level, and then select read and write views. Click
Add to save the new group and return to the Groups list. To delete a group, check the box next to the
group name, then click Delete.
FIG. 27 Configuring SNMPv3 Groups
NXA-ENET Software Management Guide
Group Name – The name of the SNMP group. (Range: 1-32 characters)
Model – The group security model; SNMP v1, v2c or v3.
Level – The security level used for the group:
noAuthNoPriv – There is no authentication or encryption used in SNMP
communications.
AuthNoPriv – SNMP communications use authentication, but the data is not
encrypted (only available for the SNMPv3 security model).
AuthPriv – SNMP communications use both authentication and encryption (only
available for the SNMPv3 security model).
Read View – The configured view for read access. (Range: 1-64 characters)
Write View – The configured view for write access. (Range: 1-64 characters)
Configuring the Switch
57