AMX NXA-ENET24 Instruction Manual page 190

Command Line Interface
Showing Commands
If you enter a "?" at the command prompt, the system will display the first level of keywords for the
current command class (Normal Exec or Privileged Exec) or configuration class (Global, ACL,
Interface, Line, or VLAN Database). You can also display a list of valid keywords for a specific
command. For example, the command "show ?" displays a list of possible show commands:
Console#show ?
access-group
access-list
bridge-ext
calendar
dot1x
garp
gvrp
history
hosts
interfaces
ip
lacp
line
log
logging
mac
mac-address-table
management
map
marking
port
power
public-key
queue
radius-server
running-config
snmp
sntp
spanning-tree
ssh
startup-config
system
tacacs-server
users
version
vlan
Console#show
The command "show interfaces ?" will display the following information:
Console>show interfaces ?
counters
status
switchport
174
Access groups
Access lists
Bridge extend information
Date information
Show 802.1x content
Garp property
Show gvrp information of interface
Information of history
Host information
Information of interfaces
IP information
LACP statistics
TTY line information
Login records
Show the contents of logging buffers
MAC access lists
Set configuration of the address table
Management IP filter
Map priority
Specify marker
Characteristics of the port
Show power
Public key information
Information of priority queue
Radius server information
The system configuration of running
SNMP statistics
Sntp
Specify spanning-tree
Secure shell
The system configuration of starting up
Information of system
Login by tacacs server
Display information about terminal lines
System hardware and software status
Switch VLAN Virtual Interface
Interface counters information
Interface status information
Interface switchport information
NXA-ENET Software Management Guide