Issuing Multiple Controls To A Device - AMX TVM-1600 User Manual

Multiple ports can be selected for play/stop etc.

Issuing multiple controls to a device

To issue multiple controls to a device:
1. Click on the Status option.
2. Select the TVM port to where the controls will be issued. Use the tick box to the extreme right of
screen to select the TVM Port. The port will highlight in orange.
3. From the bottom toolbar click on the drop down control list beside the 1st Control. A list of
commands (power on, power off, A/V select) will be visible. Select the first command to be
executed e.g. Power on.
Only three commands are appropriate for Control 1; Power On, Power Off and A/V
select.
4. From the bottom toolbar click on the drop down control list beside the 2nd Control. A list of
commands will be visible. Select the second command to be executed for example Play.
5. In this scenario a device (DVD player) will be powered on and instructed to play – play control
issued after a 5 second delay.
6. To execute the commands for the selected TVM port(s) click on Send To Included.
Multiple ports can be selected for power on/off etc. and play/stop.
TVM1600 16 Port Managed TV Distribution Hub - User Guide
Configuring TVM Ports
21