Issuing controls to a device
Controls can also be issued to devices from the Status page. This will be covered
later in this manual.
To issue a control to a device from the Devices page:
1. Click on the Devices option.
2. Select the Device(s) to accept the control. Use the tick box to the extreme right of screen, beneath
the Include column, to select the device. The Device will highlight in orange.
3. From the bottom toolbar (FIG. 13), click on the drop down control list beside the 1
of commands will be visible.
4. To execute the command for the selected Device, click on Send To Included.
Issuing multiple controls to a device
To issue multiple controls to a device;
1. Click on the Devices option.
2. Select the Device(s) to accept the control. Use the tick box to the extreme right of screen, beneath
the Include column, to select the device. The Device will highlight in orange.
3. From the bottom toolbar click on the drop down control list beside the 1st Control. A list of
commands will be visible (power on, power off, A/V select). Select the first command to be
executed.
4. From the bottom toolbar (FIG. 13) click on the drop down control list beside the 2nd Control. A list
of commands will be visible (as above). Select the second command to be executed.
5. To execute the commands for the selected Device, click on Send to included.
TVM1600 16 Port Managed TV Distribution Hub - User Guide
Configuring Devices
st
Control. A list
13