Voltage; Important Safety Markings; Markings Used In This Manual; Rating Label - AMX TVM-1600 User Manual

Important Safety Markings

Markings Used In This Manual

The following symbols are used on the Endeleo TVM hardware and throughout this Installation Guide to
advise you of important instructions. All maintenance must be carried out by an Endeleo trained and
qualified engineer.

Voltage

This symbol (FIG. 1) warns the presence of a voltage of sufficient magnitude to cause a severe or fatal
electric shock. Follow the appropriate instructions carefully to avoid the risk of injury.
FIG. 1 Voltage symbol
There are NO user serviceable parts within the TVM Hub.

Rating Label

The rating label, containing important safety information, is found on the bottom left of the hub beneath
the Hub's IEC connector. Symbols used on this label are explained below;
(IEC 60417-5032)
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received
including interference that may cause undesirable operation.
FIG. 2
Rating Label
TVM1600 16 Port Managed TV Distribution Hub - User Guide
The TVM Hub is suitable for Alternating current, 100 - 240V AC.
FCC (Federal Communications Commission) Standards;
TESTED TO COMPLY
WITH FCC STANDARDS
FOR HOME OR OFFICE USE
Conforms to particular European Directives.
Important Safety Markings