Issuing Primary Controls To A Device; Issuing Secondary Controls To Ports - AMX TVM-1600 User Manual

Configuring TVM Ports

Issuing primary controls to a device

Only three commands are appropriate for Control 1; Power On, Power Off and A/V
select.
To issue a first control to a device:
1. Click on the Status option.
2. Select the TVM port to where the control will be issued. Use the tick box to the extreme right of
screen to select the TVM Port. The port will highlight in orange.
3. From the bottom toolbar click on the drop down control list beside the 1
commands will be visible (FIG. 22).
FIG. 22 Bottom toolbar (1) of the Status page
4. To execute the command for the selected TVM port click on Send To Included.
Multiple ports can be selected for power on/off etc.

Issuing secondary controls to ports

When a device is already powered on, basic control functions such as Play, Stop, Pause etc. can be
executed from the Status page (FIG. 23).
FIG. 23 Bottom toolbar (2) of the Status page
1. Click on the Status option.
2. Select the TVM port to where the control will be issued. Use the tick box to the extreme right of
screen to select the TVM Port. The port will highlight in orange.
3. From the bottom toolbar click on the drop down control list beside the 2nd Control. A list of
commands will be visible. Select the second command to be executed for example Play.
4. To execute the command for the selected TVM port click on Send To Included.
20 TVM1600 16 Port Managed TV Distribution Hub - User Guide
st
Control. A limited list of