Configuring TVM Ports
Port configuration is accessed through the Status option, then clicking on the relevant port hyperlink or
configuration option from the main Status screen.
The Status and Port Control options are almost identical – the Port control option
displays a control toolbar which is used to issue controls to devices connected to
TVM ports.
For this section, we will use the Status option as most administration will be performed from here.
If the Control toolbar is not visible from the Status page, click on Port Control.
By default, the ports are named in numerical order starting with Port 1 through Port 16.
Port Properties
To view a port's properties:
1. Click on the Status option.
2. Click on the relevant port hyperlink e.g. Port 1.
3. The following will be displayed:
Port version
The port controller version information will be listed at the top of the page. To view a port's controller
version;
1. Click on the Status option.
2. Click on the relevant port hyperlink e.g. Port 1 (FIG. 14).
FIG. 14
Port version 3.1.00
TVM1600 16 Port Managed TV Distribution Hub - User Guide
• Port Version
• Port name
• Port Power
• TVM-RX03 version (if connected)
• IR remote type
• Address
• Device Port
Configuring TVM Ports
15