Hub Configuration; Network Configuration - AMX TVM-1600 User Manual

Hub Configuration

Hub Configuration
Each Hub can be configured for the correct network environment. It is also possible to configure each
Hub for the correct date and time.

Network configuration

Hubs can be configured for the network environment using the Setup page (FIG. 3).
FIG. 3
Setup Page
1. Click on the Setup option to the left of the screen.
2. The following Hub options should be configured from this page:
3. Once the network environment has been configured click on Update.
All changes are immediate - once the IP address of the hub has been changed,
redirect the web browser to the changed address.
2
Hub IP Address, Subnet Mask and Default Gateway;
UDP Port (default is 2008) and
Hub name (maximum of 20 characters).
TVM1600 16 Port Managed TV Distribution Hub - User Guide