Configuration - Status Page
Issuing Commands To Multiple Ports
As with the input selection it is also possible to send multiple control commands to all or selected ports.
Because the control strings are stored in the UDM Receivers, a global command across multiple ports
will allow any range of display devices to be controlled simultaneously.
1. Select the Include checkboxes for the Ports to be changed (use the Include All link to toggle all Ports
to be included on or off). The ports are highlighted in blue.
2. Open the Control drop-down menu for one of the selected Ports, and select the control to be
executed.
3. Click on Execute button (see FIG. 33 on page 37).
It is also possible to control centrally located hardware such as DVD players, using
the "Devices" page. See the Issuing Commands to Centrally Located Devices section
on page 56 for details.
Assigning a Command to an Endeleo UDM-RC02 Remote Control
Ensure the IR command which the UDM-RC02 Remote control will issue has been
learned by the Hub first. Refer to the Protocols and IR learning section of this manual.
1. Click on a Port name to access the Port Configuration options for the selected Port.
2. Click the User Control link (FIG. 34). .
FIG. 34
Port Configuration options for Port 1 - User Control link
Alternatively, click on the "User Control" link for the relevant Port on the main Status
Page (see FIG. 33 on page 37).
38
This action invokes the User Control options for the selected Port (FIG. 35).
Keys 0 to F represent the keys on the UDM-RC02 Remote Control.
Commands for each Key are selected from the Control drop-down menu (provided for each
Key).
Click to access User Control
options for this Port.
UDM-1604C 4x16 Multi-Format Distribution Hub