Changing Channels; Changing Channels By Name; Changing Channels By Number; Controlling Volume - AMX TVM-1600 User Manual

Configuring TVM Ports

Changing Channels

Changing channels by name

Each port on the hub has a drop down box, in which will be displayed all of the channels (from the
channel line up) that the TVM port has been enabled for (FIG. 19).
FIG. 19
Configuring a different channel for a port
To change channels:
1. Ensure the Status option has been selected.
2. From the Channel column select the (relevant TVM port) drop down Channel list to reveal the
channels configured for this port.
3. Select the desired channel to be displayed at this port.
Channel changes/device selection will be instantaneous.

Changing channels by number

Each port on the hub has a number column, in which will be displayed the currently configured channel
that the user port is displaying.
1. Ensure the Status option has been selected.
2. From the Channel number column type the relevant Channel number to change to that channel.
3. Click Execute to change the channel.

Controlling Volume

To send a volume control to a display device:
1. Click on the Status option.
2. Configure the volume. For example to change the volume to 55 type in 55 beneath the Volume
column in the correct TVM port.
The maximum volume value is 63 i.e. 0 = no volume and 63 means maximum
volume.
3. Once the setting has been configured, click on Execute to the right of screen.

Mute

To mute a device;
1. Click on the Status option.
2. To mute the volume click the tick box beneath the Mute column for the correct TVM port.
18 TVM1600 16 Port Managed TV Distribution Hub - User Guide