Figure 3-12: Acl Table Tab - Alvarion BU-DS.11 User Manual

3-20
ACL Table Tab (BU only)
The Access Control List table is used to authorize/deny access to certain stations.
The list can contain up to 128 MAC addresses.
♦ To Add a MAC Address to the list – Type the MAC address in the Add/Delete
MAC Address edit box. The format should be XX-XX-XX-XX-XX-XX. The status
of the entry is defined by checking the Allowed check box: check to allow
association of the station with the defined address, or uncheck to disable
association of the station. Check the Add check box to add the entry, and click
the apply button. If the format of the entry is not valid the add operation shall
not be carried out. Duplicate entries are discarded.
♦ To Delete a MAC Address from the list – Click the row containing the MAC
address to be deleted and check the Delete check box. The entry will be
removed from the list after clicking the Apply button.
♦ To Change the Status – The address must first be deleted from the list and
then added again with the new status.
The broadcast address FF-FF-FF-FF-FF-FF can serve as a default entry to define
the status of addresses that are not otherwise defined in the list.
If the table is empty, access is denied to all addresses.
The default is a list that includes only the FF-FF-FF-FF-FF-FF address, with an
Allowed status, meaning that all stations can associate with the BU.

Figure 3-12: ACL Table Tab

BreezeNET DS.11 Series User Manual