Door Opening For All Doors - Spartherm Varia M60h Installation And Operating Instructions Manual

Closure valve
If you decide to connect separate combustion air it is
mandatory to install a closure valve to prevent conden-
sate formation and to prevent the room from becoming
cold while the stove is not in use. It should ideally be
located as close as possible to the outside wall. It can
be controlled from inside if it is not too far from the
stove (cable length = 47").
seperate combustion
air connector
connection from the outside to the zcm with installation of a closure valve

2.7 DOOR OPENING FOR ALL DOORS

Use the "operational tool" to open and close the door.
operational tool
connection point
Position the "operational tool" on the connection point.
Move the door up and down.
closure valve
fresh air duct
6"
O
grill
17
CAUTION:
The "operation tool" has a spring. If you let go the
"operation tool", it jumps back from the connection
point.
The "operation tool" is heavy. Do not drop it on the
floor or on your foot.