Time Programs - Rinnai RS100 Training Program

Time Programs

• When entering the Time Program chapter, timers for only heating (HC) or only DHW
(DHW) can be selected
• Up to three events per day can be selected with a unique temperature (in Farhenheit or
Celsius)
• By default HC has one daily event from 6 am-10 pm
• By default DHW has one daily event from 5 am-10 pm
• Outside of these times, the setback temperature will be observed if no other events are
added
• By default HC will observe the nighttime outdoor reset curve or room setback temp
of 61°F depending on which type of application (Outdoor Reset mode or RC)
• By default DHW will maintain 100°F (this is adjustable)
• If a second or third event is added, the day and ―2‖ or ―3‖ will display
• ―3‖ will not display until a second event is entered
• ―2‖ or ―3‖ will not display if the previous event ends at 24:00 (midnight)
www.rinnai.us • © 2009 Rinnai America Corporation
22