Rinnai RS100 Training Program page 14

RS100 Operational Modes
This allows selection of unique operational modes-a cursor is displayed above the selected mode.
Any unique operating mode and its settings will be cancelled when a new unique mode is selected.
DHW only will operate based
on the times and
temperatures set in the
―Timeprograms‖ chapter. If
P1-P3 is selected, there will
be up to three different
schedules to choose. In this
mode, heating will not
operate—frost protection is
enabled.
NOTE: During normal operation in RC mode, the area/room temperature is displayed—not the set point.
Continuous heating and
reduced hot water operation
according to temperature set
points
www.rinnai.us • © 2009 Rinnai America Corporation
Continuous reduced heating
and reduced hot water
operation according to set
back temperature set point
Heating and DHW are in
standby. Frost protection is
enabled.
14