Rinnai RS100 Training Program page 21

Condensing boiler controller

Hide thumbs Also See for RS100:

Table of Contents

Parameter Chapters

Once in the parameter menu, there are eight chapters that allow specific adjustments. Some

parameters (or whole chapters) may only be accessible from the installer level access:

• TIMEPROGRAMS—Allows changes to individual time programs

• This entire section can be accessed by the user

• HYDRAULIC—Allows changes to heating and DHW pump assignments

• This chapter is not available at the consumer level

• SYSTEM—Allows changes to general system parameters

• DHW—Allows changes to DHW parameters (excluding time programs)

• This chapter is not available on combi models or if there is no sensor at terminals 16

and 17 (DHW priority)

• UNMIXED CIRCUIT—Allows changes to the heating only parameters (excluding time

programs)

• ALARM—Allows display of last five errors

• This chapter is not available at the consumer level

• SENSOR ADJUSTMENT—Allows calibration of the RS100 temperature sensor

• This chapter is not available at the consumer level

• TIME / DATE—Allows changes to current time and date

Table of Contents