Rinnai RS100 Training Program page 38

Boiler Parameters
• When connecting an RS100, please observe the following notes at each parameter (continued):
PARA Default
10°F/
14
min 28°F/min
15 00 00 or 01
23 26°
27 32°
146°F
31
(154°F)
73 0
(in relation to the RS100)
Range
0- Gradient acceleration—this is set when para 2 is
selected based on application or it can be set here
Booster after night reduction 00=no, 01=yes
-4°F
to Freeze protection activation temperature
50°F
0°F
Minimum T-set value for heating mode (reset
to
curve base point)
158°F
DHW tank temperature adjustment (154°F is
104°F
default for the Q175C Combi model and not
to
available to change. E series Combi models are
176°F
set to 132°F and not able to change too)
0
to Vent and Altitude Compensation
100
www.rinnai.us • © 2009 Rinnai America Corporation
Parameter Chapter
Description RS100 Note
This is not adjustable
from the RS100
RS100 UC PARA 6 will
override this setting
RS100 System PARA 5
will override this setting
RS100 UC PARA 12
will override this setting
RS100 DHW PARA 6
will override this setting
RS100 doesn't effect
(ensure this is set in
every boiler though)
38