Table of Contents
Advertisement
RS100 User Buttons-Shortcuts
Pressing and holding the following buttons for three seconds will immediately display the following.
Operational mode is changed back to Auto.
Programmed timers will take effect
Operational mode is changed to Party. A value will be
displayed and available to change if needed.
Operational mode is changed to Absent/Economy . A
value will be displayed and available to change if needed.
Operational mode is changed to a one-time hot water boost while in
setback. This value can be adjusted from 0.5 to 240 minutes. When the
boost time or day time DHW temperature is reached, DHW is maintained
again at the setback temperature.
www.rinnai.us • © 2009 Rinnai America Corporation
After entering the correct
menu, dial in the correct
setting then press the
rotary button to save
18
Advertisement
Table of Contents
