Set Day/Time - Rinnai BRIVIS Touch Installation Manual

3.2 Set Day/Time

To access and modify the day and time do the following:
1. Identify the Master Controller; it has an 'M' in the bottom right hand
corner on the home screen. Press
right hand corner, refer Diagram 12.
Diagram 12: Home screen in the OFF state
2. Press on the MENU screen, refer Diagram 13.
Diagram 13: MENU Screen
on the home screen, top
3. The MENU > SET DAY/TIME screen will appear, refer Diagram 14.
To modify either the day or the time press the
adjacent to the time and day.
Diagram 14: Set the Day and Time
4. When complete press
MENU screen, refer Diagram 13 or the home screen, refer Diagram
12, when system is first started. Press
screen, Diagram 12.
When the system is first powered up the 'MENU > SET DAY/TIME'
screen will appear, refer Diagram 14. If more than one Touch
Controller is installed the 'MENU > SET DAY/TIME' screen will
appear for all. Set the correct day and time on the assigned
Touch Master Controller and then press 'Done'. For all other
Touch Controllers press 'Done' as they will need to be converted to
SLAVE Controllers.
11
buttons
to save and you will return to the
to return to the home