Table of Contents
Advertisement
Figure 6.8 Remove the seal cap.
NOTICE: Once the seal cap has been removed it CANNOT
be reattached.
Figure 6.9 Remove the insulation basket and white insu-
lation from the center vent pipe.
Figure 6.10 Remove the insulation from the outer vent pipe.
Heat & Glo • SL-5/5LP-IFT, SL-7/7LP-IFT, SL-9/9LP-IFT Installation Manual • 2632-980 Rev. E • 4/21
44
2 SCREWS
Figure 6.11 To attach the first section of vent pipe, make
sure to use the fiberglass gasket to seal between the first
vent component and the outer fireplace wrap. Use 2 self
tapping screws to secure the gasket to the outer wrap.
Hide quick links:
Advertisement
Table of Contents
