Heat & Glo SL-5-IFT Installation Manual page 16

IRON AGE DECORATIVE BARRIER FRONT
IMPORTANT! This fireplace requires an installed decorative barrier front to prevent direct contact with the
hot viewing glass. DO NOT operate the fireplace with the barrier removed.
Decorative barrier front must be ordered at time of fireplace purchase. If decorative barrier front is not
present, contact dealer.
Barrier Mesh: Integral to
Decorative Barrier Front
in.
SL-7-IFT FSI-36
mm
in.
SL-9-IFT FSI-42
mm
Figure 3.8 Decorative Barrier Front Dimensions - Iron Age
Heat & Glo • SL-5/5LP-IFT, SL-7/7LP-IFT, SL-9/9LP-IFT Installation Manual • 2632-980 Rev. E • 4/21
16
A B C
27-3/8 23-1/8 37-3/16
695 587 945
34-3/8 25-3/16 44-3/16
873 640 1122
Note: See Section 10 for hearth, mantel and
finishing requirements.
A
B
C
D E F
1-1/4 6-3/4 32-7/8
32 172 835
1-1/4 6-3/4 34-13/16
32 172 884
F
E
D
1 in. to 6 in. Overlap
Fit Finishing-Refer to
Figure 10.12
G X
34-1/8 37-3/8 34-3/8
867 949
36-1/16 44-3/8 36-3/8
916 1127
G
Y
873
924