Heat & Glo SL-5-IFT Installation Manual page 11

CLEAN FACE DECORATIVE BARRIER KIT
IMPORTANT! This fireplace requires an installed decorative barrier front to prevent direct contact with the
hot viewing glass. DO NOT operate the fireplace with the barrier removed.
Decorative barrier front must be ordered at time of fireplace purchase. If decorative barrier front is not
present, contact dealer.
Barrier Mesh: Integral to
Decorative Barrier Front
SL-5-IFT CF-32
SL-7-IFT CF-36
SL-9-IFT CF-42
Figure 3.3 Dimensions - Clean Face Kit
Heat & Glo • SL-5/5LP-IFT, SL-7/7LP-IFT, SL-9/9LP-IFT Installation Manual • 2632-980 Rev. E • 4/21
A
C
A B
in. 26-9/16 18-11/16
mm 675 475
in. 31-1/2 22-3/16
mm 800 564
in. 38-1/2 24-1/16
mm 978 611
Note: See Section 10 for hearth, mantel and
finishing requirements.
B
C D
30-13/16 23-5/16 25-7/16
783 592
35-13/16 26-13/16 28-15/16
910 681
42-3/4 28-11/16 30-13/16
1086 729
D
E
G
F
E F
3-1/2 4-9/16
646 89
3-1/2 4-9/16
735 89
3-1/2 4-9/16
783 89
G
116
116
116
11