3/2013
3
End
Power supply and control unit
press shortly
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station. The programming
lock can only be removed with the Service Device TCSK-01 or the configuration software configo™
Delete the programming
Before an already programmed bell button can be reprogrammed, the previous program-
ming must be deleted.
1
Power supply and control unit
press shortly
2
press until the delete melody sounds
3
Power supply and control unit
press shortly
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station.
The programming lock can only be removed with the Service Device TCSK-01 or the configuration software
configo™.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94 - 9 88 11 88
Fax: +49 (0) 41 94 - 9 88 129 E-Mail:
LED is ON
LED blinks
1)
LED is ON
hotline@tcsag.de
13
programming mode of the system is OFF
Initiate
Programming mode of the system is ON
Delete button
release
End
programming mode of the system is OFF
Subject to technical changes.
PI_PAK_uk 1A