TCS PAK Product Information page 11

3/2013
1 Initiate
Power supply and control unit
press shortly
2a Programming via voice connection
or
establish voice connection
to the front-door station
2b Alternative: programming via floor push button
+
Press floor push button 2 times in
quick succession, each time a ring
tone sounds
3 End
Power supply and control unit
press short
1) If a Progsperr tone sounds instead, a programming lock is set in the front-door station. The programming
lock can only be removed with the Service Device TCSK-01
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94 - 9 88 11 88
Fax: +49 (0) 41 94 - 9 88 129  E-Mail:
LED blinks
press button shortly
press button shortly
Repeat the steps, until all bell buttons are programmed.
LED is ON
hotline@tcsag.de
11
Programming mode of the system is ON
... a ring tone sounds at the front-door
and indoor station
(if the indoor station is not accessible)
... a ring tone sounds at the front-door
station and at the indoor station
Programming mode of the system is OFF
1)
1)
Subject to technical changes.
PI_PAK_uk 1A