Table of Contents
Advertisement
Framing Dimensions - Bay Install
NOTE: Framing may be constructed of combustible material and does not require steel studs.
Framing
Description
Dimensions
A
Framing Height
B*
Framing Width
C*
Framing Depth
D
Minimum Height to Combustibles
G
Vent Centerline Height
**
Gas Connection Opening Height
**
Gas Connection Height
**
Gas Connection Inset-Centre Opening
** See manual for alternate Gas/ Electrical connection options
Ensure that the wood base that the appliance will sit on is strong enough to support the full weight of this appliance.
The overall weight of this appliance is 208 kg (shipping weight).
Note: A combined minimum
of 1161 square centimeters
of open area is required for
the convection air outlet to
cool the enclosure. Ensure
clearances for Convection Air
Outlets are met.
See clearances ACB60E in this
manual as there are different
methods as to how this can
be achieved.
Max 4cm x 14 cm
Note: This appliance must be
installed on a solid surface
such as a plywood floor
which must be the full width
and depth of the appliance.
Max 4cm x 14 cm
See gas connection location in this manual
See gas connection location in this manual
See gas connection location in this manual
*
ACB60E
1137 mm
1810 mm
516 mm
2038 mm
1478 mm
*
Note: Unit must be installed onto a solid
backwall - do not install directly onto studs.
*C
Note: The framing depth does not take into
account plasterboard/wood or similar materi-
als against the back wall. The framing depth
will need to change based on the thickness of
the material (example: 516 mm framing depth
+ 13 mm plasterboard = 529 mm).
installation
City Series ACB60E | 33
Advertisement
Table of Contents
