Table of Contents
Advertisement
Unit Assembly Prior to Installation
Before you Start - Removing the Unit from the
Pallet
Remove the screws securing the unit to the pallet
Due to the size and weight (208 kg shipping weight) of the ACB60E--lifting
and moving the unit will require 4 people.
Place a length (long enough to get a solid grip on each side) through the
opening on each side of the unit as shown.
Lift and move the unit carefully.
Note: Remove when unit it is in final position.
Rear Standoffs
The 6 rear standoffs are already attached to the appliance. Do not remove
these standoffs. The 2 top rear standoffs are designed so that screws can be
used to secure the appliance to the rear wall if needed. Studs must be in this
location if choosing to screw this into studs.
Leveling Legs
There are four levelling legs - two on each side, that can be adjusted (with the
supplied tool—found in the manual package) if required.
tooltip
tooltip
installer's information
Top rear standoffs
Leveling legs
City Series ACB60E | 27
Advertisement
Table of Contents
