Inner Black Panel Installation
ACB60 INNER ENAMEL PANEL
INSTALLATION
ACB60E - 7 outer panels and 8 inner panels.
Turn off gas and power to unit and allow to cool to room tempera-
ture. Remove the safety glass and firebox glass — see manual for
instructions.
1. Install 5 inner base panels as shown.
2. On back of firebox wall--install 6 screws (loosely) in locations shown
below. Install 3 back panels--hang panels on installed screws through
keyhole opening.
3. Reinstall firebox glass - see instructions in manual.
ACB60E OUTER PANELS
1. Install outer side panel as shown below.
920-336
2. Install glass stopper (if desired) by sliding down the outside of
the outer side panel.
3. Slide backwall outer panel behind glass stopper bracket (if installed).
4. Install front end panel-place on unit as shown below.
1
CITY SERIES
installation
City Series ACB60E | 75
09.23.20