Table of Contents
Advertisement
Chapter 3 Practice Using the TIA Software
TIA Software Tutorial
TIA Software Tutorial
You should already have the software running. Refer to Chapter 1 of this
guide for information on how to install the software and start the TIA
application.
Start
1
Once the application is started, click the green Preset button to set the
TIA User Interface software to its default conditions.
2
Select File>Use Synthetic data.
You will be using data that the TIA software will generate for
demonstration purposes. This is a convenient way to experiment with the
measurement and analysis features without the need for input signals.
3-4
Getting Started Guide
Advertisement
Table of Contents
