To Include Software Instructions In A Sequence - HP 1660CP Series User Manual

Using the Pattern Generator

To include software instructions in a sequence

To include software instructions in a sequence
The following software instructions are available:
•
User Macro
•
Repeat Loop
If you are inserting a User Macro and have not yet built the macro, go to "To
build a user macro" later in this chapter. Macros must be built before they
can be inserted. To include these instructions in a sequence, use the
following procedure.
Highlight the vector that will be output at the time of the instruction.
1
Select the INST field.
2
Select the desired software instruction to insert.
3
If required, select any qualifying actions for the instruction.
4
5–10