Table of Contents
Advertisement
NOTE
Chapter 1 How to Begin
Installing the HP E1741A Time Interval Analyzer or TIA User Interface
Software
displayed. Refer to Chapter 4 of this guide for procedures to
analyze these waveforms. There are examples for the following
measurements:
•
data-to-data
•
data-to-clock
•
PLL settling time
You MUST install these waveforms to perform the exercises in this guide.
Interface Library
Select this option to load the file needed for the interface option you
will select in the next step.
Interface... Button
Click the Interface button and select the interface you will use.
The choices include HP-IB, the Radisys embedded, the National
MXI, the National GP-IB and None. Click the Continue button to
enter the selected interface and return to the installation window.
Your selection will be shown one line below and to the right of the
Interface button.
Create Program Group
This option will setup a new program group called Disk Test and
place an icon for this software in that group.
If you de-select this option, no program group is created. After
installation, you can place the executable program (hp-tia.exe) in
any program group you want, using the selections under File menu
in the Windows Program Manager.
1-8
Getting Started Guide
Advertisement
Table of Contents
